SAVE WATER & ELECTRICITY!
 

Split Magnetic Water Heaters

This is a new breakthrough in Geyser Technology that, after extensive testing, has obtained NRCS Certification. 

 

The geyser we are referring to is the Hi Temp Induction Water Heater. This technology utilizes electrical energy to create a magnetic field within the geyser to maximize the heating process and delivers the exact amount of Hot Water as a conventional Geyser in 1/3^rd of the time saving you 60% plus in power consumption in heating water.

 

The beauty of this geyser is not only in the Energy Saving but also the space taken to install and the price of course. You can now plan for smaller installation areas and increase possible living space. The unit can be installed anywhere as it is a pleasing to the eye. 

 

If you are looking to save space, save money, save energy and be more carbon neutral this is the Geyser of the Future.

 

We offer a 3 Years Warrantee on the Geyser which INCLUDES the Electrical components unlike other geysers that have 5 year Warranty on Cylinder and 1 year Warranty on Electrical Components

Split magnetic water heater consist of two parts:

• storage tank geyser

• induction generator unit

Features:

• NCRS Certified

• Factory fitted Temperature / Pressure valve included

• Includes Safety pressure valve

• 15 Amp plug connection

• 3 year warranty on manufacture & material defects 

Description:

• Split magnetic induction water heating

• High quality insulation

• Stainless steel water storage unit

• Attractive plastic housing material

• Wall mounted installation

• Capacity: 30L, 40L, 50L, 60L

• Power range required : 2000 - 4000w

• Voltage : 220v

• Standard plumbing fitting

• Class 2 safety rating (no transfers of AC to contents)

• 15 Amp plug connection

• No maintenance costs

How the induction geyser works.

Using a magnetic induction process the water is heated more rapidly than conventional water geysers. The electrical supply to the generator in the unit is converted into a magnetic field which heats the water. There is no direct alternating current (AC) in close proximity to the water, which makes the unit safer than conventional geyser elements. The unit uses new temperature sensing technology that is more accurate than a conventional thermostat. The unit includes a high density thermal insulation layer, to sustain the water temperature.

 

Multiple protections in place like:

• Dry Burn

• Low/High heat

• Low Voltage

Technical Aspects:

1. The unit has a Class 2 safety rating, the first of its kind in the word, primarily because there is NO transfer of alternating current (AC) into the water or the holding tank.

2. The risk of rupture of the geyser is eliminated as a built in temperature - pressure valve forms part of the unit (factory installed)

3. The electrical configuration of the unit is such that the likelihood of switch leakage malfunction is reduced, as is the build-up of pipe rust & iron content in the water

4. The unit includes a high density thermal insulation layer around the storage tank, which is made stainless steel and magnesium for increased product life.

5. The geyser draws between 2kw - 4kw of power depending on the size of the geyser

Electricity usage:

To heat a conventional150lt geyser from20DegC to 65DegC takes two and a half hours and uses 7.8kw of electricity. To heat the same amount of water via the induction water heater will take approximately1 hour and uses approximately 2.5kw of electricity.

• Operating cost approximately 1/3 of the cost of a conventional geyser

• Substantial water saving due to location of the unit

What are the benefits?

• Safety valves supplied

• Easy to install

• Quick access to hot water

• Only uses power while heating

• Saves water

• Saves electricity

• Saves space

• Exceptionally safe

• Only requires a 15 Amp plug point – just plug in and switch on!

 

Power	Model	Dims	N.W.	Price
2kw	CN-30L	610x440x240	13.7kg	R3500
2kw	CN-40L	750x440x240	14.7kg	R3800
2kw	CN-50L	870x440x240	15.5kg	R3920
2kw	CN-60L	945x440x240	15.5kg	R4100
4kw	CN-50L	1085x440x240	16.5kg	R4340
4kw	CN-60L	1085x440x240	16.5kg	R4580

 

...........................................................................................................................................................

Split Magnetic Water Heater

click here to view the CN30L TEST (288Kb)

Introduction
Geysers have historically been prone to:

• Carbon monoxide buildup

• Switch malfunction

• Electric leakage

• Tank leakage

• Bursting

• Polluted / blocked pipes and valves

The split magnetic geyser has two parts: a water heater and magnetic energy generator. The magnetic energy generator converts electric energy into magnetic energy which transfers to the water heater.

A magnetic receiver in the water heater converts the magnetic energy into an eddy current which in turn heats tank and then the water. The split magnetic geyser uses new temperature test technology to control the water temperature effectively.

There is an inbuilt high-density thermal insulation layer that minimizes temperature loss.
Design protection measures include:

• Dry burn protection

• High voltage protection

• Low voltage protection

• Surge protection

• Power out protection

• Controlled overheating protection

• Water tank magnesium ion protection

The Split Magnetic water heater takes advantage of the latest technologies, making it a safe, convenient and durable water heater

 

Technical Specifications Time to heat water per 1 deg.
Unit	CN30L	CN60L	CN80L
2KW	0.5 min	TESTING IN PROGRESS
4KW	0.2 min
Unit	CN30L	CN60L	CN80L
Power supply	220-240V 50Hz	220-240V 50Hz	220-240V 50Hz
Rated Power	2 KW	4 KW	4 KW
Rated Current	9 amp	2 x 9 amp	2 x 9 amp
W/P relief valve	0.6 MPA	0.6 MPA	0.6 MPA
Waterproof Level	IPX4	IPX4	IPX4