|
|
|
FREQUENTLY ASKED QUESTIONS
When you bought your pool, it was for many reasons like having fun
with the family, entertaining friends, exercise, those quiet
relaxing moments or perhaps even for therapeutic reasons. I bet, you
spent a lot of time making the decision to invest in a quality
swimming pool, furniture, fencing and accompanying items that go
along with a pool. With this kind of investment, you are expecting
to get the most use out of your pool. If your pool is frequently too
cold (22 degrees & below) swimming is extremely uncomfortable. You
are not making full use of your investment. Hi-Temp solar pool
heating can effectively double the length of your pool season, by
extending it to between 8 to 10 months of the year.
If
you follow our recommended number of panels, and have proper
exposure to the sun (at least 10am to 3pm), your pool will be
increase 6 to 12 degrees warmer than it was before you heated it,
under the same weather conditions.
Solar energy is FREE, so there are no running costs!
North facing is not necessary. The solar panels should be installed
where the sun is on them from at least 10am to 3 pm each day.
Depending on the angle of the mounting surface, east and west facing
systems can function equally as well. Hi-Temp solar panels can be
fitted on any roof, including a flat roof.
80% of swimming pools have a pump rating of 0.75kW or 1.1kW
installed. These pumps will effectively circulate your pool water
through the solar panels with very little extra load. The
specifications for the speck pumps are as follows:
Heat pumps are basically an air conditioner in reverse. Electric
heat pumps are generally three times the cost of a Hi Temp solar
heating system. Electricity is needed to operate the unit, which
could cost you between R180 and R500 per month depending on the make
& model size. The unit also needs to be serviced annually. The main
benefit is that it is not reliant on the weather therefore you can
achieve a constant temperature throughout the year.
As
we are a plastic manufacturing company, we are in a position to keep
costs down. Every part off the Hi Temp Solar Panel is manufactured
at our factory in Killarney Gardens. We extrude all the 7mm piping
from Virgin HDPE which has 10% carbon black & UV stabilizer added,
this ensures a long lifespan. The 'rubber grommets' are injection
moulded using virgin Santoprene or Multibase G polymer. No materials
used for manufacture are reground or second grade. Only the highest
quality materials are used. Because of the fact that every part of
the panel is manufactured on site and not bought out, we can better
any price in the market place. Feel free to visit our factory and
see the panels being manufactured.
|
|
|